If your 2014 Fiat 500L has a tire pressure light that illuminates in the dashboard when you start your vehicle, it has TPMS sensors. The TPMS light should illuminate briefly when you start your car, but then turn off afterwards. If your tire pressure light keeps coming on or the tire pressure light is blinking or flashing, then you likely have The purpose of the TPMS on Your 2013 FIAT 500 is to warn You that one or more tires is under-inflated which could produce premature tire wear, tire failure, and unsafe driving conditions. To perform a reset of the TPMS only takes a few moments. First, turn the ignition to the "On/Run" position and then use the "Menu" button to select "Vehicle Information." Scroll to the "Tire Pressure" menu To reset the Fiat 500L tire pressure warning light, you have to turn the key to turn on the instrument panel and move to the menu with the controls located on the central dashboard. It will be necessary to scroll until you arrive at the tire reset item: you will have to select the item by pressing the SET key. The vehicle may need to be. driven for up to 20 minutes above 15 mph (24 km/h) in. order for the TPMS to receive this information. 1. For example, your vehicle may have a recommended. cold (parked for more than three hours) placard pressure. of 30 psi (207 kPa). If the ambient temperature is 68°F. Press the Set button located above the central dashboard, then use the buttons next to the button previously pressed. We scroll through the menu until we find the maintenance to be reset (we reset the maintenance). We switch the instrument panel off and on again and wait for it to illuminate. Let's check the modifications made to the car. Maintenance Schedule. Welcome to the in-depth maintenance manual for the 2020 Fiat 500L, a car renowned for its distinctive fusion of utility and Italian style. Knowing how to look after and maintain your Fiat 500L is crucial to ensuring its durability, performance, and safety, whether you’re the proud owner of this small car or contemplating pXCWr5Z. Before you reset the TPMS on your Fiat 500 ensure that all the tyres are at the correct pressure using a suitable tyre inflator and tyre pressure gauge. There are various Fiat 500 models out there. This method should work on the Fiat 500 models with a dashboard that has 3 buttons to access and use the menu on the dashboard. If your 2012 Fiat 500 uses a direct system, resetting the tire pressure sensors may be as simple as pushing a reset button on the dash or following a menu as indicated in your owner's manual. If your 2012 Fiat 500 uses an indirect system, the system must be reset using a magnet or scanning tool by either a dealer or one you have bought yourself.

fiat 500l reset tyre pressure